Evaluation of postoperative changes in condylar positions after orthognathic surgery using balanced orthognathic surgery system / 대한악안면성형재건외과학회지

Background@#Many studies on maintaining the condyle in a normal or anatomical position during orthognathic surgery have been conducted to stabilize surgical outcomes and prevent iatrogenic temporomandibular joint complications. The aim of this study is to evaluate the changes in condylar positions after orthognathic surgery using virtual surgical planning via the balanced orthognathic surgery (BOS) system. @*Methods@#Postoperative changes in condylar position were retrospectively evaluated in 22 condyles of 11 patients with skeletal class III malocclusion who underwent orthognathic surgery using virtual surgical planning via the BOS system. The center point coordinates of the condylar head before and after orthognathic surgery were analyzed using voxel-based registration. @*Results@#Changes in the condylar position mainly occurred downward in the y-axis (−1.09 ± 0.62 mm) (P < 0.05). The change in the x-axis (0.02 ± 0.68 mm) and z-axis (0.01 ± 0.48 mm) showed no significant difference between before and after orthognathic surgery. @*Conclusion@#These results indicate that the changes in the condylar positions after orthognathic surgery using virtual surgical planning via the BOS system mainly occurred downward in the y-axis, with slight changes in the x- and z-axes. The change in the condylar position after orthognathic surgery using the BOS system is clinically acceptable.

Titanium mesh and pedicled buccal fat pad for the reconstruction of maxillary defect:case report / 대한악안면성형재건외과학회지

Background@#Pedicled buccal fat pad (PBFP) has been used for the reconstruction of small-sized maxillary defects but cannot be used without hard tissue support on the defect larger than 4 cm × 4 cm × 3 cm.Case presentation: A 64-year-old man had a history of squamous cell carcinoma of the left maxilla. After removal of the posterior maxilla, a complex bone defect (size, 5 cm × 4 cm × 3 cm) was immediately reconstructed using PBFP combined with a titanium mesh. A pinpoint fistula was found in the left palatal region 1 month after the surgery and was treated with a palatal sliding flap. There were no further complications during the follow-up. @*Conclusion@#The present technique demonstrated that PBFP combined with a titanium mesh could be used for the reconstruction of complex maxillary defect (size, 5 cm × 4 cm × 3 cm) without additional bone graft.

Surgery-first approach reduces the overall treatment time without damaging longterm stability in the skeletal class III correction: a preliminary study / 대한악안면성형재건외과학회지

Background@#Compared to the conventional approach, including preoperative orthodontic preparation, the socalled surgery-first approach (SFA) seems to reduce the overall treatment time in the correction of skeletal class III dentofacial deformity. However, there have been controversies about postoperative skeletal stability with SFA.Therefore, we investigated the long-term stability and the overall treatment time after maxillomandibular surgery for skeletal class III correction with or without preoperative orthodontic preparation. @*Methods@#This retrospective study included eight patients who underwent maxillomandibular surgery for class III correction with the SFA (SFA group) and 20 patients who underwent the conventional approach (CA group). A comparative study of the change in the maxillary and mandibular position on preoperative (T1), 1-day (T2), 6-month (T3), and 2-year (T4) postoperative lateral cephalograms. We calculated the overall treatment time for each group. @*Results@#At the presurgical stage (T1), there was no bias in the skeletal features between the two groups. In the surgical change from T1 to T2, the mandible (point B) of the CA group was significantly moved superiorly. Short-term changes from T2 to T3 revealed that the mandible moved forward in both groups, whereas the maxillary position showed no significant changes. Long-term changes from T3 to T4 demonstrated that none of the measured parameters showed any significant differences. Finally, the average of overall treatment time was 15.1 months in the SFA group and 26.0 months in the CA group. @*Conclusions@#These findings suggest that SFA in bimaxillary orthognathic surgery for skeletal class III correction leads to predictable long-term skeletal stability, similar to surgery with CA. Furthermore, SFA reduced the overall treatment time compared to CA.

Atypical femoral neck fracture after prolonged bisphosphonate therapy

Of the drugs developed to prevent and treat osteoporosis, bisphosphonate has played a very important role in preventing osteoporotic fractures. However, case reports describing atypical femoral fractures in patients using long-term bisphosphonates have emerged. The majority of atypical femur fractures occurs in the lateral aspect of the subtrochanteric or femur diaphysis, which is explained by accumulation of tensile stress in these areas. Although the superior cortex of the femur neck withstands maximum tensile stress, to our knowledge, there have been only two reports (three cases) of atypical femoral neck fracture. In addition, none of those case reports revealed detailed pathology related to suppressed bone turnover rate. We encountered an incomplete femoral neck fracture and diagnosed it as “atypical” on the basis of the patient’s lack of trauma and medication history and pathological findings. For patients with groin pain, minimal or no trauma, and a history of long-term bisphosphonate use, an atypical femoral neck fracture should be considered.

The effect of fixation plate use on bone healing during the reconstruction of mandibular defects

OBJECTIVES: This study sought to compare efficiency results between the use of a customized implant (CI) and a reconstruction plate (RP) in mandibular defect reconstruction in an animal model. MATERIALS AND METHODS: Fifteen rabbits underwent surgery to create a defect in the right side of the mandible and were randomly divided into two groups. For reconstruction of the mandibular defect, the RP group (n=5) received five-hole mini-plates without bone grafting and the CI group (n=10) received fabricated CIs based on the cone-beam computed tomography (CBCT) data taken preoperatively. The CI group was further divided into two subgroups depending on the time of CBCT performance preoperatively, as follows: a six-week CI (6WCI) group (n=5) and a one-week CI (1WCI) group (n=5). Daily food intake amount (DFIA) was measured to assess the recovery rate. Radiographic images were acquired to evaluate screw quantity. CBCT and histological examination were performed in the CI subgroup after sacrifice. RESULTS: The 1WCI group showed the highest value in peak average recovery rate and the fastest average recovery rate. In terms of reaching a 50% recovery rate, the 1WCI group required the least number of days as compared with the other groups (2.6±1.3 days), while the RP group required the least number of days to reach an 80% recovery rate (7.8±2.2 days). The 1WCI group showed the highest percentage of intact screws (94.3%). New bone formation was observed in the CI group during histological examination. CONCLUSION: Rabbits with mandibular defects treated with CI showed higher and faster recovery rates and more favorable screw status as compared with those treated with a five-hole mini-plate without bone graft.

Corrigendum: Successful surgical missions for cleft

This correction is being published to correct mistakenly grouping the organization Smile Train under the umbrella of non-governmental, mission-based organizations. In fact, Smile Train empowers local medical professionals to provide care within their own communities in response to the limitations of the mission model.The author apologizes for any inconvenience this may have caused.

The effect of fixation plate use on bone healing during the reconstruction of mandibular defects

OBJECTIVES@#This study sought to compare efficiency results between the use of a customized implant (CI) and a reconstruction plate (RP) in mandibular defect reconstruction in an animal model.@*MATERIALS AND METHODS@#Fifteen rabbits underwent surgery to create a defect in the right side of the mandible and were randomly divided into two groups. For reconstruction of the mandibular defect, the RP group (n=5) received five-hole mini-plates without bone grafting and the CI group (n=10) received fabricated CIs based on the cone-beam computed tomography (CBCT) data taken preoperatively. The CI group was further divided into two subgroups depending on the time of CBCT performance preoperatively, as follows: a six-week CI (6WCI) group (n=5) and a one-week CI (1WCI) group (n=5). Daily food intake amount (DFIA) was measured to assess the recovery rate. Radiographic images were acquired to evaluate screw quantity. CBCT and histological examination were performed in the CI subgroup after sacrifice.@*RESULTS@#The 1WCI group showed the highest value in peak average recovery rate and the fastest average recovery rate. In terms of reaching a 50% recovery rate, the 1WCI group required the least number of days as compared with the other groups (2.6±1.3 days), while the RP group required the least number of days to reach an 80% recovery rate (7.8±2.2 days). The 1WCI group showed the highest percentage of intact screws (94.3%). New bone formation was observed in the CI group during histological examination.@*CONCLUSION@#Rabbits with mandibular defects treated with CI showed higher and faster recovery rates and more favorable screw status as compared with those treated with a five-hole mini-plate without bone graft.

Corrigendum: Successful surgical missions for cleft

This correction is being published to correct mistakenly grouping the organization Smile Train under the umbrella of non-governmental, mission-based organizations. In fact, Smile Train empowers local medical professionals to provide care within their own communities in response to the limitations of the mission model.The author apologizes for any inconvenience this may have caused.

Successful surgical missions for cleft

No abstract available.

Anatomical repair of a bilateral Tessier No. 3 cleft by midfacial advancement / 대한악안면성형재건외과학회지

BACKGROUND: Bilateral Tessier number 3 clefts are extremely rare, and their surgical treatments have not been well established. CASE PRESENTATION: The authors describe the case of a patient with a right Tessier number 3, 11 facial cleft with microphthalmia, a left Tessier number 3 facial cleft with anophthalmia, and cleft palate. We repaired simultaneously the bilateral soft tissue clefts by premaxillary repositioning, cleft lip repair, facial cleft repair by nasal lengthening, midfacial advancement, and an upper eyelid transposition flap with repositioning both the medial canthi. Postoperatively, the patient showed an esthetically acceptable face without unnatural scars. CONCLUSIONS: We achieved good results functionally and esthetically by midfacial advancement with facial muscle reposition instead of traditional interdigitating Z-plasties. The surgical modality of our anatomical repair and 3 months follow-up results are presented.

Bilateral cleft lip repair with simultaneous premaxillary setback and primary limited rhinoplasty / 대한악안면성형재건외과학회지

BACKGROUND: Functional closure of the orbicularis oris muscle and esthetic reconstruction of nasolabial components are impossible in patients with severely deformed premaxilla. Here, we review a surgical strategy for patients with unremedied premaxilla retrospectively. RESULTS: Vomerine ostectomy and premaxillary setback with nasolabial repair were performed in 12 patients with bilateral cleft lip and palate. The mean age of patients was 21.7 months. The extent of ostectomy varied between 3 and 11 mm. There were no serious complications from defective perfusion to the premaxilla or the philtral flap. The follow-up period ranged from 2 to 25 months. Proper positioning of the premaxilla and satisfactory nasolabial esthetics were achieved in all patients. CONCLUSIONS: We performed nasolabial repair after premaxillary setback without jeopardizing the premaxillary segment or the philtral flap. Our surgical strategy could be recommended in poor socio-economic circumstances due to the cost effectiveness of limiting the number of surgeries.

Comparative study on long-term stability in mandibular sagittal split ramus osteotomy: hydroxyapatite/poly-l-lactide mesh versus titanium miniplate / 대한악안면성형재건외과학회지

BACKGROUND@#Resorbable devices have recently been adopted in the field of orthognathic surgery with controversies about their postoperative skeletal stability. Hence, we determined the long-term skeletal stability of unsintered hydroxyapatite/poly-l-lactic acid (HA/PLLA) mesh for osteofixation of mandibular sagittal split ramus osteotomy (SSRO), and compared it with that of titanium miniplate.@*METHODS@#Patients were divided into resorbable mesh and titanium miniplate fixation groups. A comparative study of the change in the mandibular position was performed with preoperative, 1-day, 6-month, and 2-year postoperative lateral cephalograms.@*RESULTS@#At postoperative 6 months—compared with postoperative 1 day, point B (supra-mentale) was significantly displaced anteriorly in the titanium-fixation group. Moreover, at postoperative 2 years—compared with postoperative 6 months, point B was significantly displaced inferiorly in the titanium-fixation. However, the HA/PLLA mesh-fixation group did not show any significant change with respect to point B postoperatively.@*CONCLUSIONS@#The HA/PLLA mesh-fixation group demonstrated superior long-term skeletal stability with respect to the position of mandible, when compared with the titanium-fixation group.

Biodegradable osteofixation in bimaxillary orthognathic surgery

No abstract available.

S100 and p65 expression are increased in the masseter muscle after botulinum toxin-A injection / 대한악안면성형재건외과학회지

BACKGROUND: The purpose of this study was to compare the expression levels of p65 and S100 in the rat masseter muscle after the injection of different concentrations of botulinum toxin-A (BTX-A). METHODS: We injected either 5 or 10 U of BTX-A into both masseter muscle of rats. As a control group, the same volume of saline was injected. After 14 days, the animals were sacrificed. Subsequently, a biopsy and immunohistochemical staining of the samples were performed using a p65 or S100 antibody. RESULTS: The cross-sectional area of each myofibril was significantly reduced by BTX-A injection (P < 0.001). The expression of p65 and S100 increased significantly with increasing concentrations of BTX-A (P < 0.001). CONCLUSIONS: The injection of BTX-A into the masseter muscle induced muscle atrophy. Subsequently, p65 and S100 expression in myoblasts were increased for the protection of muscle cells.

Frontal augmentation as an adjunct to orthognathic or facial contouring surgery / 대한악안면성형재건외과학회지

BACKGROUND: The dimensions and shape of the forehead determine the esthetics of the upper third of the face. Korean young people consider a broad and smooth, rounded forehead more attractive. As a result, frontal augmentation becomes more popular in patients with dentofacial deformities. Various surgical procedures and materials have been used in frontal augmentation surgery, with associated advantages and disadvantages. Silicone is a good candidate for frontal augmentation. The author presents two cases of esthetic frontal augmentation with a prefabricated silicone implant in female patients with dentofacial deformities. CASE PRESENTATION: In case 1, a 24-year-old female patient underwent frontal augmentation surgery with simultaneous maxillomandibular and zygomatic osteotomies to correct facial asymmetry. A silicone implant was fabricated preoperatively using a positive template stone mold of her forehead. In case 2, a 23-year-old female patient underwent total facial contouring surgery including frontal augmentation for improved facial esthetics. A computed tomography (CT)-guided rapid prototype (RP) model was used to make the silicone implants. The operative procedure was safe and simple, and the silicone implants were reliable for a larger degree of frontal augmentation. Six months later, both patients had recovered from the surgery and were satisfied with their frontal shape and projection. CONCLUSIONS: Frontal augmentation with silicone implants can be an effective adjuvant strategy to improve facial esthetics in patients with a flat and narrow forehead who undergo orthognathic reconstruction or total facial contouring surgery.

Use of mandibular chin bone for alveolar bone grafting in cleft patients / 대한악안면성형재건외과학회지

BACKGROUND: We evaluated and compared the outcomes of different ossification processes in patients with alveolar cleft in whom correction was performed using endochondral bone graft or intramembranous bone graft. METHODS: The patients were divided into two groups: the endochondral bone (iliac bone or rib bone) graft group and the intramembranous bone (mandibular bone) graft group. Medical records and radiologic images of patients who underwent alveolar bone grafting due to alveolar cleft were analyzed retrospectively. Through postoperative and follow-up radiologic images, the height of the interdental bone septum was classified into four types based on the highest point of alveolar ridge. Then, the height of the interdental bone septum and the area of the bone graft were evaluated according to the type of bone graft. In addition, the occurrence of complications and the need for an additional bone graft, the result of postoperative orthodontic treatment, and the eruption of impacted teeth were investigated. RESULTS: Thirty patients were included in this study. There was no significant difference in the change of the interdental bone height and the area of the bone graft according to the type of bone. There was no significant difference in the success rate of the surgery according to the type of bone. One patient underwent an additional bone graft surgery during the follow-up period. CONCLUSIONS: The outcomes of alveolar bone grafting were not significantly different according to the type of bone graft. If appropriate to the size of the recipient site, the chin bone is a useful graft material in alveolar cleft, as is the iliac bone.

Change of the airway space in mandibular prognathism after bimaxillary surgery involving maxillary posterior impaction / 대한악안면성형재건외과학회지

BACKGROUND: The purpose of this retrospective study was to develop a two- and three-dimensional analysis of the airway using cone-beam computed tomography (CBCT) and to determine whether the airway space would be changed in mandibular prognathism after bimaxillary surgery involving maxillary posterior impaction. METHODS: Patients requiring orthognathic surgery from 2012 to 2014 were recruited for this study. CBCT scans were obtained at three points: preoperatively (T0), immediate postoperatively (T1), and after 6 months postoperatively (T2). The nasopharynx, oropharynx, and hypopharynx were measured on the CBCT scan for each patient in a repeatable manner. With the midsagittal plane, linear measurements in the middle of each were obtained. For the CBCT, volumetric measurements of each and total airway were obtained. RESULTS: A total of 22 consecutive patients (11 men and 11 women) were included in the present study. The total volume was significantly reduced (p < .001). However, the change of the diameter and volume of the nasopharynx was not statistically significant (p = .160, p = .137, respectively). In the oropharynx, the change of both the diameter and volume showed statistical significance between preoperatively and immediate postoperatively (p < .001, p = .001, respectively) and also preoperatively and after 6 months postoperatively (p = .001, p = .010, respectively). In the hypopharynx, the change of both the diameter and volume showed statistical significance between preoperatively and immediate postoperatively (p = .001, p < .001, respectively) and also preoperatively and after 6 months postoperatively (p = .001, p < .001, respectively). CONCLUSIONS: The bimaxillary surgery involving maxillary posterior impaction can reduce the volume of airway in the patients of mandibular prognathism. Although total airway volume was reduced significantly, the changes in the volume and diameter of the nasopharynx were not statistically significant. The maxillary posterior impaction affects on the nasopharyngeal airway minimally.

Long-term follow-up of early cleft maxillary distraction / 대한악안면성형재건외과학회지

BACKGROUND: Most of cleft lip and palate patients have the esthetic and functional problems of midfacial deficiencies due to innate developmental tendency and scar tissues from repeated operations. In these cases, maxillary protraction is required for the harmonious facial esthetics and functional occlusion. CASE PRESENTATION: A 7-year old boy had been diagnosed as severe maxillary constriction due to unilateral complete cleft lip and palate. The author tried to correct the secondary deformity by early distraction osteogenesis with the aim of avoiding marked psychological impact from peers of elementary school. From 1999 to 2006, repeated treatments, which consisted of Le Fort I osteotomy and face mask distraction, and complementary maxillary protraction using miniplates were performed including orthodontics. But, final facial profile was not satisfactory, which needs compromising surgery. CONCLUSIONS: The result of this study suggests that if early distraction treatment is performed before facial skeletal growth is completed, an orthognathic surgery or additional distraction may be needed later. Maxillofacial plastic and reconstructive surgeons should notify this point when they plan early distraction treatment for cleft maxillary deformity.

Bimaxillary orthognathic surgery and condylectomy for mandibular condyle osteochondroma: a case report / 대한악안면성형재건외과학회지

Osteochondroma is rarely reported in the maxillofacial region; however, it is prevalent in the mandibular condyle. This slowly growing tumor may lead to malocclusion and facial asymmetry. A 39-year-old woman complained of gradual development of anterior and posterior unilateral crossbite, which resulted in facial asymmetry. A radiological study disclosed a large tumor mass on the top of the left mandibular condyle. This bony tumor was surgically removed through condylectomy and the remaining condyle head was secured. Subsequently, bimaxillary orthognathic surgery was performed to correct facial asymmetry and malocclusion. Pathological diagnosis was osteochondroma; immunohistochemistry showed that the tumor exhibited a conspicuous expression of BMP-4 and BMP-2 but rarely expression of PCNA. There was no recurrence at least for 1 year after the operation. Patient's functional and esthetic rehabilitation was uneventful.

Bioabsorbable osteofixation for orthognathic surgery / 대한악안면성형재건외과학회지

Orthognathic surgery requires stable fixation for uneventful healing of osteotomized bony segments and optimal remodeling. Titanium plates and screws have been accepted as the gold standard for rigid fixation in orthognathic surgery. Although titanium osteofixation is the most widely used approach, the use of bioabsorbable devices has been increasing recently. Biodegradation of bioabsorbable devices eliminates the need for a second operation to remove metal plates and screws. However, long-term stability and relapse frequency in bioabsorbable osteofixation are still insufficiently studied, especially in cases of segmental movements of great magnitude or segmental movements to a position where bony resistance exists. This paper reviews the background, techniques, and complications of bioabsorbable osteofixation and compares bioabsorbable and titanium osteofixation in orthognathic surgery in terms of skeletal stability.